WHAT YOU WILL NEED

 

  This zip file containing the gold pattern and the presets needed for Blade Pro

Super Blade Pro - HERE

Lattice Composer 102 - HERE 

 

 

1. Open up your image and add a 3px white border

2. Select this border with you wand, tolerance and feather both set on zero then flood with the gold pattern ---> keep selected

3. Selections ---> Invert and apply the following cut-out

4. Keep selected and reapply the cut-out only this time change the Vertical and Horizontal to minus 2 ---> select none

5. Picking a colour from your image add a 3px border - I used #AC3221

6. Add another 3px border ---> select and flood fill with the gold pattern

7. Using your chosen colour add a border size 10px

8. Add a 2px border ---> select and flood fill with the gold pattern ---> Selections ---> Invert and apply the same cut-outs as in steps 3 and 4 ---> select none

9. Add a 2px border using your chosen colour

10. Add a 2px border ---> select and flood fill with the gold pattern

11. Add a 20px white border ---> Select and apply Blade Pro's Red Red Rose preset ---> keep selected

12. Using the Lattice Composer plugin apply the sde_hjolly preset as shown below ---> select none

13. Repeat steps 8 to 10 but leave the cut-out step as we don't need that here

14. Add a border size 10px using your chosen colour

15. Add a 20px white border ---> select and apply the Blade Pro NK Fate preset ---> keep selected ---> Selections ---> Invert and apply the same cut-out as in steps 3 and 4 ---> select none

 

Add some corners if you wish and your all done !

Hope you enjoyed this one

*s*