Always A Lady

WHAT YOU WILL NEED

Blade Pro Preset - HERE ( I don't know who the owner of this preset is but I thank them very much)

Graphic Plus

1. Open up your image and add a 2px white border

2. Select your border and apply the Blade Pro we_opalsparkles preset ---> keep selected ---> Invert and apply the following cut-out

3. Pick a colour from your image, I used #C9B8A5 and add a 20px border

4. Select this border and apply the following Inner Bevel

5. Keep selected and apply the following cut-out, if you used a dark colour for your frame you wont need to do this part

6. Select none

7. Add a 2px white border ---> select and apply the Blade Pro opalsparkle preset ---> select none

8. Using a colour a couple of shades darker than your frame, I used #807361 add a 5px border

9. Select this border and apply the following Inner Bevel

10. Select none

11. Repeat step 7

12. Using your main colour (mine is #C9B8A5) add a 15px border ---> select and apply Noise 15 then Graphic Plus Cross Shadow but change the bottom two settings to 80 and 85

13. Repeat step 7 ---> keep selected ---> Invert and apply the same cut-out as in step 5 ---> select none

14. Repeat steps 8 to 11

15. Again using your main colour, add a 30px border, select and apply the following Inner Bevel

16. Select none

17. Add a 5px white border ---> select and apply the Blade Pro opalsparkles preset

Select none

And your all done !

Hope you enjoyed this one

*s*

All tutorials on this site are written and created by Sandee and copyrighted to Sandee's Place.

You may not remove any images, HTML or zip files for the purpose of reproducing these tutorials in any way.

You may not store or archive these pages in any Yahoo Groups files,

or any mailing list sites. These pages may not be sent through any email groups.

These tutorials may not be translated and placed on any site due to some people removing my name

from the tutorials and adding their own.

PSP groups are welcome to give a text link only to any of my tutorials.